Greetings of the day,
Thanks for the details provided.
To add the switch to dashboard please check if the switch is running the minimum software code 08090 version, if not an upgrade must be performed.
The ICX7150 Switch will be added automatically if the switch is running the minimum software code 08090, if the switch is showing requesting to connect, please try to gain access via SSH, Telnet, or Console.
1:Find the IP address of the Switch, while you are connected to the Unleashed SSID/Wi-Fi ID.
Run the IP scanner to find the IP address of the Switch.
How to find my Ruckus “Devices IP address” using free applications
2:Once you know the IP address if the Switch, gain access via Telnet, SSH, or Console(for console Access the IP Address is not required)
How to remotely access to 'ICX 7150-12P' or 'access points' "Network devices"
How to Access an ICX Switch remotely via SSH or Telnet, using a Windows computer
How to console in the ICX-7150-12CP 'Ruckus Switch'
RUCKUS ICX 7150 USB TYPE C CONSOLE (tutorial video for ICX)
(Tutorial for MAC)
3:Once you are connected to the Switch, run the next commands. These are the credentials for the switch.
Note: "show version" will provide detail about the current version running currently.
4: If you are running lower than 08090, you must perform an upgrade, I will recommend the code 08095g UFI which is the recommended code(must be the image starting with SPS)
How to Upgrade a Switch ICX-7150-C12P using a USB flash drive
How to upgrade a Switch ICX7150-C12P via TFTP
How to upgrade a switch via Web GUI (ICX7150 Switch)
Lennar Home Community