06-27-2023 01:35 PM
I have an ICX 7150 running on the latest SPR UFI code. I am trying to upgrade to the Switch firmware but I am getting an error writing to flash. I have tried from the Web CLI and the console through SSH. Each time, it copies and fails at 25% when writing. I have tried a new download and after several reboots, but no go. I have saved off the support files from the web upgrade.
06-30-2023 03:02 PM
Hi @diver19743
Thank you for the response and the information.
Could you please confirm, if is it a Lennar Home setup?
Thank you again for your patience.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
06-30-2023 03:04 PM
Of course, that's why I am posting my issue here. 🙂
06-30-2023 03:10 PM
Hi @diver19743
Thank you for the response and the confirmation.
We suggest you upgrade to a recommended stable version.
The recommended stable version is 8095g (08.0.95g)
Below is the explanation to perform the Upgrade on the switch via the TFTP method:
The following guide is an example of an upgrade via TFTP server, by using an application (FREE) to send files or upload remote files to a device, in our case, we will use it to update a new version to the Switch, basically, it will send the image version remotely from the computer to the switch.
How to upgrade a Switch ICX7150-C12P via TFTP
Please download the 08.0.95g files from the portal and start the upgrade. Please skip the 08080f part from the above guide, and directly start from-
copy tftp flash 192.168.1.211 SPS08095gufi.bin primary
File required to Upgrade: As shown in the below screenshot.
Please upgrade as explained above/from the link and let me know if you are stuck at any point or have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
06-30-2023 03:24 PM
Same issue
ICX7150-C12 Router#copy tftp flash 192.168.1.211 sps08095gufi.bin primary
Parameter Validation Successful
Image Download started
..................................................................................Image Download Done
Image Validation Started
Tuning CFS scheduler parameters...
Compressing Console file
Copying fitrace errorlog file to flash
CORE_PATTERN:PID=2618 !usr!bin!img_flash_packages UID=0 GID=0 sig=11
Wed May 10 06:28:00 UTC 2023: Dumping core file to /tmp.gz, this will take couple of minutes ...
Image write to flash failed
Wed May 10 06:28:03 UTC 2023: Core file collected as /tmp.gz, processing the core file ...
Copy Operation Failed
ICX7150-C12 Router#Wed May 10 06:28:03 UTC 2023: Removing the oldest core file:core_3981_img_flash_packages-6_2023-05-06_12-19-53.gz of size 56 kbytes
seq 7
Wed May 10 06:28:03 UTC 2023: Calculating checksum: core_2618_img_flash_packages-8_2023-05-10_06-28-03.gz
Wed May 10 06:28:03 UTC 2023: Checking integrity of core_2618_img_flash_packages-8_2023-05-10_06-28-03.gz
Wed May 10 06:28:03 UTC 2023: Moving core_2618_img_flash_packages-8_2023-05-10_06-28-03.gz of size 56 KB to flash, with available space of 833548 KB...
Wed May 10 06:28:19 UTC 2023: Core saved as /fast_iron/cores/core_2618_img_flash_packages-8_2023-05-10_06-28-03.gz.
Moving system log files to persistent memory
Copying SZ log files to persistent memory..
Done.
Core collection and system log collection completed, Switch will not reboot for img_flash_packages crash
06-30-2023 03:30 PM
Hi @diver19743
Thank you for the information you shared.
Please reboot the Switch once by performing the below commands and try once again:
Note: Hit Enter to accept each command
enable
reload
y
Once the Switch comes up please retry upgrade and let me know if you have any queries in this regard.
Thank you again for your patience.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.