ICX-7150-C12P

[dhill]

Recently my AP's started to periodically lose power.  After doing some troubleshooting I noticed that when the ports on my switch were lit, the AP's worked.  If not, the AP's would not work.  Rebooting the switch would restore the AP's for a limited amount of time.  One AP would restore quicker than the other but eventually they both would go out.  I was able to log into the switch and see that the software has not been updated since we moved into our home in 2017.  I don't know if this could be causing the problem.  I also notice all admin states were on, but I do see a low voltage alert on the ports.  I have been rebooting the switch for several days now, but the AP's won't restore.  The port lights would blink sometimes when they were trying to boot up, but no lights at all now on the ports.  All other ethernet cables on the switch are working fine.  I have tried switching the ports the AP's are plugged into, but still get no power.

[Jayavidhya]

Hi @dhill 

Thanks for your response,

Yes, to avoid further errors in future you need to upgrade the switch by using the attached guide in the link.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community
 

[dhill]

After upgrading the software, my access points have returned to normal status.  Thank you.

[Jayavidhya]

Hi @dhill 

Thanks for your response,

Good to hear that the issue got resolved.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community