12-19-2023 07:16 PM
I have a Lennar smart home built in 2018. My ICX 7150-C12P will not stay powered on. When I unplug it in the green light blinks once then it immediately powers off. It will not stay on. I have read all of the troubleshooting posts but nothing has resolved my issue. I was told that I need to request an RMA. Please advise how I should proceed. Thank you.
12-26-2023 06:59 AM
Hello! I still need assistance regarding my ICX 7150-C12P.
12-26-2023 07:14 AM
Hi Caryn740
Thank you for reaching us
Please run through the below link which will help you connect to the switch using console cable.
Once you have console access to the switch try the below steps
Check if using above method the switch will boot up or does it still show same behavior
Thanks
12-26-2023 07:34 AM
Hi @Caryn740
Greetings!!!
Thank you for contacting RUCKUS Lennar Home Community.
I hope you are doing well!!!
Thank you for the information you shared.
As per the case description, I understand that your RUCKUS ICX-7150-C12P Switch is not working.
On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)
Before uploading the photos please log in to the RUCKUS account and you can upload the image.
Please let me know the answers to ALL the above queries or let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
01-03-2024 06:44 PM