I cannot access my switch via CLI

[Eldude65]

I have been dealing with this issue for 2 days now. My after a power outage my network switch disconnected. I attempted to change its IP address using Unleashed interface on the web. It was stuck in a connecting loop. I went into the switch via the CLI interface. Gave it see static IP, removed it and tried to enable SSH by setting up a crypto key. Long story short I can no longer access my switch via CLI. My switch is still disconnected, but for some reason my Internet is stable for now. I don't know what else to do. The last post I had about this I thought I posted in the Lennar section and was told I couldn't be helped on that forum and I had to move to this one before being helped further. I'm at my wits end and really have no other ideas. I need help 

[pinky_ruckus]

Hello @Eldude65 ,

Greetings!

I hope this message finds you well.

I understand that it appears multiple posts have been created on the same topic. To help us address your concern more efficiently, we recommend following the original post to avoid any confusion and streamline our response.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Re-Issue-with-Ruckus-ICX-715...

Please let us know if you have any queries in this regard. We're here to ensure your issue is resolved as quickly as possible.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community