RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
08-16-2022 10:21 PM
How screwed am I? It went through and now I'm unable to get to 192.168.0.1. I used r610_200.6.10.1.308.bl7. Did i brick my device?
08-17-2022 01:13 AM
Well. I looked for some information here and was able to console in via putty. I attempted to tftp over the r710 firmware created the command text file as a .rcks. Ran it. It took the file and all seemed well, but after a reboot it no longer sees my physical connection to my latop after a while and drops. It connects and drops and now I have no way of talking to the device. I screwed up.
08-17-2022 01:35 AM
Welp. I don't know what happened. Walked away for 30 minutes and came back. I had held down the reset but it didn't work. I came back after some time... 192.168.0.1 magically logged and the firmware worked. Wtf. I'm good. How. Fn magic.
08-18-2022 07:10 AM - edited 08-18-2022 08:30 AM
Hello @Plato12 ,
Since the hard reset helped regain the access to the AP, I would also suggest you to re-flash the AP with the correct firmware.
You can download the AP R710 Unleash image from the below link:-
Latest version: https://support.ruckuswireless.com/software/3463-ruckus-unleashed-ap-200-12-mr1-refresh1-software-fo...
200.6.10.1.308 version: https://support.ruckuswireless.com/software/1686-ruckus-unleashed-ap-200-6-10-1-308-ga-software-for-...
Regards,
Sarita Shekhar | CCNA | CWNA
Staff Technical Support Engineer,
https://support.ruckuswireless.com/contact-us
