We need to check more in deep why both signal are poor, normally should be caused by interference, so lets check.
1:If you have more than one access point, ensure if both have the same issue or all of them?
2:Ensure you are running the latest code for the Unleashed system, following the next guide.
3:Check the status of the Switch, please share if you are running from the routing image or the Switching image.
Tap>Switches>check if the name is Switch or router.
4:Check that the speed for the Access points interfaces is 1000mbps.
Access Points>choose the AP>Show AP Info>scroll>under Physical address must be on 1000Mbps if the speed is in less than 1000Mbps, you have cabling issues.
5:Gather the logs for all the Access Points.
Access point>choose each AP one by one>Show AP Info>Save Logs
Technical Support Engineer | L2 TAC Wired | Lennar Home Community Moderator