Showing results for 
Search instead for 
Did you mean: 

Help- moved to lennar pre-owned home

New Contributor

moved into a pre owned lennar home. Need help setting this up. 

I have ATT and ran a cat-7 wire from the back of the router to port 3 on the rockus switch. The rockus switch has a cat-5 or 6 wire connected to the access point. It connects and works, but its extremely slow. I checked directly on the ATT router and i get a Gig speed, but when connecting on the access point i get about 25Mpbs which is super slow. 

Need help, and also if there is a installation guide you can send me. I would like to update the switch and access point as well at some point.


Its not letting me post pictures. But i was successful in making that change.

i will copy and paste results here

Compressed Sec Code

08.0.90BT211 (SPS08090d.bin) 

Screenshot 2024-04-01 at 8.31.52 PM.png

Hi @parrillas 

Thank you for the response and the update.

Yes, now both of your Switch partitions are on the SPS code.

Please now check the connectivity and let me know if there are any issues.

Thank you again for your patience.


Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Hi @parrillas 


Hope you are doing well.

Could you please provide an update on the status of the issue to proceed further? Please let me know if you have any queries.

Thank you.


Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

so i was able to run those updates. I do noticed that when im on zoom calls it tends to freeze up quite often. Im running on wifi. The ruckus access point is about 10 feet away.

Is there a way to fix that?