09-28-2024 10:51 AM
Last weeks, we had a power outage, and ever since, our internet has been acting up. The router, modem, and incoming signal have all been checked and are functioning normally. The RUCKUS ICX-7150-C12P switch is running, but the connection quality has dropped significantly compared to what it was before. All the AP lights are green.
I’ve also tried troubleshooting steps from other posts but no luck.
09-30-2024 07:19 AM
Hi @Rmslead ,
Greetings!
Thank you for contacting RUCKUS Lennar Home Community.
I hope you are doing well!!!
Thank you for the information you shared.
From the case description, I understand that you are facing slow speed issues after the power outage.
This issue is because your switch is running on the Routing code (SPR). The Switch should run on the Switching code (SPS) for Lennar home users. Due to a power outage/power spike, the Switch boots up on the other partition which may be running on a ‘Routing Code’ results in causing this issue.
Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to fix the issue when the Switch is running in the Routing code.
Please follow the process as explained in the article and let me know if you have any queries in this regard.
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.
10-02-2024 07:50 AM
Hello @Rmslead ,
Greetings!
This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.
I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.
Please feel free to contact if you have any further concerns regarding the same.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.