Flash Amber lights then Dead. No Power.

[jonmorey]

Hello. I am a Lennar owner and have been on the community. I found an item which matches my problem exactly. It says I need an RMA and that the unit is dead.  There is no way to connect to it without power. What do I do?  It is a ICX 7150 C12P.

[jonmorey]

Serial number on the device is FEK3222P19P.

[Vásquez_Fer]

Hi @jonmorey 

Hope you are doing well! 

1-On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on? 

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

2-Make sure it is plugged into a well-known outlet/power source

Best Regards 

Fernando Vasquez

[jonmorey]

Thank you or the quick response.  None.  My situation fits the one by NorthKozar titled "Ruckus ICS 7150-C12P does not power on" 

[Vásquez_Fer]

Hi @jonmorey 

Make sure it is plugged into a well-known outlet/power source

Could you please attached a picture/photo of that that the ICX - 7150 -C12 P is not powering up 

Try that the photo includes the outlet where the cable that goes to the switch can be seen.

Best Regards 

Fernando Vasquez