Eveything is connected but i still can't find my lennar wifi on my phone for setup.

[Aliahmad]

 

[Imran_ruckus]

Hi @Aliahmad 

Thank you for the response and the information.

All the connections on the Switch seem good.

The connections are correct, now we may need to factory reset the APs. Please follow the below process to factory reset your APs to configure them with a new SSID.

IMPORTANT NOTE: To perform a factory reset correctly on one of the access points, you must disconnect the rest of your other access points from the "ICX-7150-switch". For example, if you have 3 access points, you should go to the switch and disconnect 2 of the cables to turn off the "2 access points" and only leave 1 connected with which we are going to work the factory reset once you configure the access point and make sure all is good, go ahead and reconnect the other Access Points back.

Physical Factory Reset of RUCKUS Access Point:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Ac...

Ruckus Unleashed Set-up using Web:

https://www.youtube.com/watch?v=j8I5aVwMNMg

Password recovery setup:

https://www.youtube.com/watch?v=sqnG8fupaLk

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Aliahmad]

Ok, I have disconnected 2 of them and have 1 of them connected, how do I do the factory reset? The link you provided doesn't help at all.

[Imran_ruckus]

Hi @Aliahmad 

Greetings!!!

Thank you for the response and the update.

Please refer to my last post which includes a guide link and videos in which we have explained the step-by-step process of the factory reset of the Access Points.

Please let me know if you are stuck at any point in the factory reset process or if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Aliahmad]

I've done the factory reset several times but I still can't find the lennar-xxxxxx wifi for setup.

[Imran_ruckus]

Hi @Aliahmad 

Greetings!!!

Thank you for the response.

Please note you will NOT get Lennar-xxxxxx for setup. There will be configure.me-xxxxxx Wi-Fi SSID for the reset process.
Please refer to my factory reset post and IMPORTATNT NOTE carefully and follow guide link and videos in which we have explained the step-by-step process of the factory reset of the Access Points.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding. 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.