01-08-2023 06:55 AM
I juat bought a home that the previous owner had a ruckus r510 set up in. I figured out my internet router needs to be connected in there with the other wireless equipment. Can I set this up with my cell phone or do I need a laptop. I don't have my laptop with me now. I can't control the smart home items currently because they seem to still be connected to the prior owner's network.
Thanks.
Solved! Go to Solution.
01-10-2023 09:40 AM
I know Geek Squad. I am decent with comouters but never encountered this.
So you are saying to turn off the Ruckus and my router, then press the reset button on the Ruckus and start it up. Then configure that..after then boot up my router?
01-10-2023 09:40 AM
I know Geek Squad. I am decent with comouters but never encountered this.
So you are saying to turn off the Ruckus and my router, then press the reset button on the Ruckus and start it up. Then configure that..after then boot up my router?
01-10-2023 02:41 PM - edited 01-10-2023 02:48 PM
Hi @Rleader
Hope you are doing well !
In order to see the configure.me we must proceed to do a factory reset and I will leave you a guide, Please read it carefully ,for this process you must disconnect the rest of the access points if you have more than 1 Access Point, from the Switch ICX-7150-C12P and proceed with the factory reset with the access point you left / keep connected to work on this process ( Factory reset )
This is the right process 'Physical Factory Reset an Access Points Ruckus'
Ruckus Unleashed Set-up using your Mobile
Best Regards
Fernando Vasquez