cancel
Showing results for 
Search instead for 
Did you mean: 

APs don't power and ring bell and thermostats don't have internet access

NP
New Contributor

My APs don't power up and ring bell and thermostats don't have internet access. Tried resetting the Ruckus device hundreds of times but failed. 

I wonder there this needs the whole system replaced.

Thank you!

1 ACCEPTED SOLUTION

Imran_ruckus
Moderator
Moderator

Hi @NP 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

Apologies for the inconvenience caused.

As per the case description, I understand that your RUCKUS setup is not working and Access Points have no power.

Please let us know the answers to the below queries to assist you better.

1. If it worked before, was there any power outage before you started facing this issue?

2. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. 

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let me know the answers to ALL the above queries and let me know if you have any queries in this regard.

Thank you again for your patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

View solution in original post

15 REPLIES 15

Hi @NP 

Greetings!!!

Thank you for the response and the details.

As described in my initial post, please share a picture of the RUCKUS ICX-7150-C12P Switch showing the light status and cable connections.

Thank you again for your patience and understanding.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Please see the device connected to a working outlet (no light at device input and no light on the status indicating led light on the device. The Ruckus device is dead. 

image.jpg

image.jpg

image.jpg

 

Hi @NP 

Thank you for your response.

I kindly request you to refer to my previous communication and proceed with uploading the pictures and a video onto the drive, showcasing the switch connected to the functional power outlet. 

For reference, please consult the EXAMPLE videos available from the provided drive link and ensure that the recorded video of your switch follows a similar format.

Once again, I appreciate your cooperation and understanding.

 

Best regards,

Imran Sanadi 

RUCKUS Lennar Home Community

Hi @NP 

Greetings! 

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it. 

Your prompt response would be greatly appreciated.

Thank you for your attention to this matter.

 

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Imran_ruckus
Moderator
Moderator

Hi @NP 

Greetings! 

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it. Please help us with the requested queries.

Your prompt response would be greatly appreciated.

Thank you for your attention to this matter.

 

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community