09-10-2024 05:46 PM
Hi. I received a replacement switch which was working fine for a few days. Now after a few days my AP has no lights showing and the internet connection is no longer showing. Below is the status of the switch and the status of the AP
Solved! Go to Solution.
09-18-2024 09:23 AM
Hi @Dylannn23
Greetings of the day!!!
Thank you for sharing the requested information.
Based on the troubleshooting done, your ICX-7150-C12P Switch is not working, and when the Access Points are plugged they are getting power for some time and goes back offline. It's an indication of Switch PoE port issues. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.
Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.
Please follow the steps as shown in the below example:
As shown in the below picture, copy the link and share it via chat from the link provided:
The below link is to contact us by chat (only)
https://support.ruckuswireless.com/contact-us
Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
09-13-2024 12:32 AM
09-13-2024 05:39 AM
Hi @Dylannn23
Greetings!!!
Thank you for the response and the information you shared.
Could you please try to browse IP address of the Switch in a web browser and login?
You should see the Switch Dashboard as shown in the below screenshot to confirm it’s a Switch IP Address.
Please check the other IP Addresses from the IP scan results, by the name of Ruckus Wireless or Brocade Communications to confirm the IP address of the Switch and try to login.
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
09-13-2024 09:06 AM
Hello. I am able to open the browser, but it will not let my sign in. I enter my username and password, but the login menu instantly pops up right away. I am using the same log in information as when I initially set up the Switch.
I checked the scan and there are no other devices by the name of "ruckus" or "brocade." Only the one I found which says icx7150
09-13-2024 09:09 AM
Hi @Dylannn23
Thank you for the response and the information you shared.
Please try the Switch default credentials mentioned in the below:
Username: super
Password: sp-admin
If the above credentials don’t work, you can try below default credential combinations as well.
Please let me know if you have any queries in this regard.
Thank you again for your patience.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
09-13-2024 09:19 AM
After one of those combinations I was able to sign in and it required me to change the password. I am now on the general systems configuration page