03-22-2023 01:12 PM
trying to configure a new icx, and with the new firmware I have a couple of questions.
before I was able to use the router-interface ve in vlans, how do we do it now??
also,
How do we create the privilege exec password?
I keep getting:
router>enable
No password has been assiged yet...
Thank you for any help
03-30-2023 11:19 AM
Hey @Dejeh1
I am not familiar with that message. Please open a support case (see my signature) and we can look at it formally if needed.
03-30-2023 02:35 PM
Okay will do.
Thanks Ben
03-30-2023 04:09 PM
Hi @BenBeck
I'm trying to configure an IP address for a single interface using the command
interface ethernet 1/2/1
port-name Frontport
ip address 10.30.30.1 255.255.255.252
but I get the error message
Invalid input ->address 10.30.30.1 255.255.255.252
Type ? for a list
Node not parsed
Also , I tried creating a router Ve and I get errors too:
ICX8200-48PF Router(config-vlan-10)# router-interface ve 10
Invalid input ->router-interface ve 10
Type ? for a list
Node doesn't exist
Is there something I'm missing?
03-31-2023 05:19 AM
You no longer need to create the VE. In your example, as soon as vlan 10 exists, you can go straight to 'interface ve 10'. This is another change. Regarding 1/2/1, is it in the default vlan? You may need to issue 'route-only' on the port.
03-31-2023 10:54 AM
Hi @BenBeck
Thanks for the clarification on the VE. Regarding 1/2/1 it's not part of any Vlan, this is an SFP port (X1) and I'll like to configure a static Ip address to it. But its not taking the config
interface ethernet 1/2/1
port-name Frontport
ip address 10.30.30.1 255.255.255.252
Invalid input ->address 10.30.30.1 255.255.255.252
Type ? for a list
Node not parsed