hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

[claude_karemera]

hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

[simon_pollard]

Hi Claude

What software version is loaded on the 7150? It should be 8.0.90 or later and the UFI version. If you are not sure paste the output of the show version command here.

Simon 

[claude_karemera]

hi Simon,

the SW firmware version is 08.0.70dbT211;  SPS08070db.bin

 

[jijo_panangat · Accepted solution]

Hi Claude,

This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.

https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...


Thanks
Jijo 

[claude_karemera]

Thanks Jijo.... let me try to upgrade.