Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-19-2020 10:38 PM
hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?
Solved! Go to Solution.
1 ACCEPTED SOLUTION
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-20-2020 11:51 PM
Hi Claude,
This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.
https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...
Thanks
Jijo
This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.
https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...
Thanks
Jijo
5 REPLIES 5
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-20-2020 12:42 AM
Hi Claude
What software version is loaded on the 7150? It should be 8.0.90 or later and the UFI version. If you are not sure paste the output of the show version command here.
Simon
What software version is loaded on the 7150? It should be 8.0.90 or later and the UFI version. If you are not sure paste the output of the show version command here.
Simon
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-20-2020 11:08 PM
hi Simon,
the SW firmware version is 08.0.70dbT211; SPS08070db.bin
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-20-2020 11:51 PM
Hi Claude,
This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.
https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...
Thanks
Jijo
This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.
https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...
Thanks
Jijo
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2020 12:59 AM
Thanks Jijo.... let me try to upgrade.

