cancel
Showing results for 
Search instead for 
Did you mean: 

hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?

claude_karemera
New Contributor III
hello.... have icx 7150-48P rejecting commands to join the SZ..... any hint please?
1 ACCEPTED SOLUTION

jijo_panangat
RUCKUS Team Member
Hi Claude,

This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.

https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...


Thanks
Jijo 

View solution in original post

5 REPLIES 5

simon_pollard
Contributor II
Hi Claude

What software version is loaded on the 7150? It should be 8.0.90 or later and the UFI version. If you are not sure paste the output of the show version command here.

Simon 

claude_karemera
New Contributor III
hi Simon,

the SW firmware version is 08.0.70dbT211;  SPS08070db.bin

 

jijo_panangat
RUCKUS Team Member
Hi Claude,

This is not a supported version, You can upgrade to 08.0.90g for managing ICX switches with SmartZone.
Pls note upgrade to the UFI image from non-UFI is a two step process, Pls refer to the upgrade guide or open a tac case if you need assistance.

https://support.ruckuswireless.com/documents/2674-fastiron-08-0-90-ga-software-upgrade-guide/downloa...


Thanks
Jijo 

claude_karemera
New Contributor III
Thanks Jijo.... let me try to upgrade.