failed to connect ICX 7150 to SZ
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-11-2019 05:35 AM
Hi,
i have installed an ICX7150-C12-2X1G POE 12-port - Version:10.1.15T225
and i am trying to connect it to my Smartzone vSZ-H - 5.1.1.0.598
i have followed the guide and configure the switch with the "sz Active-list command
and i have verified there is connectivity between both devices on all ports, but this doesnt seem to work for me
SSH@GroupA#show sz status
============ SZ Agent State Info ===================
Config Status: None Operation Status: Enabled
State: SZ QUERY Prev State: INIT Event: SZ QUERY RESPONSE
SWR List : None
Active List : 10.31.3.8
DHCP Option 43 : No
DHCP Opt 43 List : None
Passive List : None
Merged List : 10.31.3.8
Merged Idx: 0 IP : 10.31.3.8
Switch registrar host: sw-registrar.ruckuswireless.com
Switch registrar discovery retry count: 7
Switch registrar host resolve failure count: 7
SZ IP Used : 10.31.3.8
SZ Query Status :
In Progress. Response Not Received.
sz logs
-------------------------
Jan 1 19:48:35:https_connmgr_send_request>Entered.
Jan 1 19:48:35:sz_execute_state_machine>Exit with state/event: SZ QUERY/5, TIMER/2002 RC: 1
Jan 1 19:48:35:sz_execute_state_machine>Entering with state/event: SZ QUERY/5, SZ QUERY RESPONSE/2007
Jan 1 19:48:35:sz_parse_sz_query_response -- Status: 600 <<
Jan 1 19:48:35:sz_fsm_sz_query_state>Moving to IP:10.31.3.8 because of retry count: 36
Jan 1 19:48:35:sz_execute_state_machine>Exit with state/event: SZ QUERY/5, SZ QUERY RESPONSE/2007 RC: 1
Jan 1 19:48:35:HTTP Request Error:Http remote connection close called.
any ideas? thanks.
i have installed an ICX7150-C12-2X1G POE 12-port - Version:10.1.15T225
and i am trying to connect it to my Smartzone vSZ-H - 5.1.1.0.598
i have followed the guide and configure the switch with the "sz Active-list command
and i have verified there is connectivity between both devices on all ports, but this doesnt seem to work for me
SSH@GroupA#show sz status
============ SZ Agent State Info ===================
Config Status: None Operation Status: Enabled
State: SZ QUERY Prev State: INIT Event: SZ QUERY RESPONSE
SWR List : None
Active List : 10.31.3.8
DHCP Option 43 : No
DHCP Opt 43 List : None
Passive List : None
Merged List : 10.31.3.8
Merged Idx: 0 IP : 10.31.3.8
Switch registrar host: sw-registrar.ruckuswireless.com
Switch registrar discovery retry count: 7
Switch registrar host resolve failure count: 7
SZ IP Used : 10.31.3.8
SZ Query Status :
In Progress. Response Not Received.
sz logs
-------------------------
Jan 1 19:48:35:https_connmgr_send_request>Entered.
Jan 1 19:48:35:sz_execute_state_machine>Exit with state/event: SZ QUERY/5, TIMER/2002 RC: 1
Jan 1 19:48:35:sz_execute_state_machine>Entering with state/event: SZ QUERY/5, SZ QUERY RESPONSE/2007
Jan 1 19:48:35:sz_parse_sz_query_response -- Status: 600 <<
Jan 1 19:48:35:sz_fsm_sz_query_state>Moving to IP:10.31.3.8 because of retry count: 36
Jan 1 19:48:35:sz_execute_state_machine>Exit with state/event: SZ QUERY/5, SZ QUERY RESPONSE/2007 RC: 1
Jan 1 19:48:35:HTTP Request Error:Http remote connection close called.
any ideas? thanks.
30 REPLIES 30
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-11-2019 06:52 AM
this is my SW version - SW: Version 08.0.90bT211
appears to be updated
appears to be updated
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-11-2019 07:35 AM
When you do show version does it look like this:
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on May 23 2019 at 23:27:11 labeled as SPS08090b
(28596544 bytes) from Primary SPS08090b.bin (UFI)
SW: Version 08.0.90bT211
If the (UFI) is missing then you will need to redo the upgrade with the UFI image.
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on May 23 2019 at 23:27:11 labeled as SPS08090b
(28596544 bytes) from Primary SPS08090b.bin (UFI)
SW: Version 08.0.90bT211
If the (UFI) is missing then you will need to redo the upgrade with the UFI image.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-11-2019 07:43 AM
I've got the UFI
SSH@GroupA#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on May 23 2019 at 23:27:11 labeled as SPS08090b
(28596544 bytes) from Primary SPS08090b.bin (UFI)
SW: Version 08.0.90bT211
Compressed Primary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 09:08:55 2019
HW: Stackable ICX7150-C12-POE
SSH@GroupA#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on May 23 2019 at 23:27:11 labeled as SPS08090b
(28596544 bytes) from Primary SPS08090b.bin (UFI)
SW: Version 08.0.90bT211
Compressed Primary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 09:08:55 2019
HW: Stackable ICX7150-C12-POE
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-11-2019 06:08 AM
Hi ,
have ICX valid licence on SZ ? In 5.0 version ICX licence it is not mandatory
have ICX valid licence on SZ ? In 5.0 version ICX licence it is not mandatory
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-11-2019 06:42 AM
my license is still valid
CAPACITY-SWITCH-BUNDLED
Ruckus-Cluster-1
Permanent
1
Default Switch Capacity License for vSZ
CAPACITY-SWITCH-BUNDLED
Ruckus-Cluster-1
Permanent
1
Default Switch Capacity License for vSZ

