failed to connect ICX 7150 to SZ

[tomer_iyar]

Hi,
i have installed an ICX7150-C12-2X1G POE 12-port - Version:10.1.15T225
and i am trying to connect it to my Smartzone vSZ-H - 5.1.1.0.598

i have followed the guide and configure the switch with the "sz Active-list command
and i have verified there is connectivity between both devices on all ports, but this doesnt seem to work for me


SSH@GroupA#show sz status

============    SZ Agent State Info     ===================
Config Status: None     Operation Status: Enabled
State: SZ QUERY             Prev State: INIT                 Event: SZ QUERY RESPONSE

SWR List            : None
Active List         : 10.31.3.8
DHCP Option 43      : No
DHCP Opt 43 List    : None
Passive List        : None
Merged List         : 10.31.3.8
Merged Idx: 0    IP : 10.31.3.8
Switch registrar host: sw-registrar.ruckuswireless.com
Switch registrar discovery retry count: 7
Switch registrar host resolve failure count: 7

SZ IP Used          : 10.31.3.8
SZ Query Status     :
        In Progress. Response Not Received.

sz logs
-------------------------
Jan  1 19:48:35:https_connmgr_send_request>Entered.
Jan  1 19:48:35:sz_execute_state_machine>Exit with state/event: SZ QUERY/5, TIMER/2002 RC: 1
Jan  1 19:48:35:sz_execute_state_machine>Entering with state/event: SZ QUERY/5, SZ QUERY RESPONSE/2007
Jan  1 19:48:35:sz_parse_sz_query_response -- Status: 600 <<
Jan  1 19:48:35:sz_fsm_sz_query_state>Moving to IP:10.31.3.8 because of retry count: 36
Jan  1 19:48:35:sz_execute_state_machine>Exit with state/event: SZ QUERY/5, SZ QUERY RESPONSE/2007 RC: 1
Jan  1 19:48:35:HTTP Request Error:Http remote connection close called.


any ideas? thanks.

[jijo_panangat]

You may create a switch registration rule  and move the switch to non default group first and try joining. Also have clock or ntp set on ICX.

[tomer_iyar]

configured switch registration rule  and time  , still fail to connect.
thanks.

[simon_pollard]

Check the SZ, the switch is probably in the Default switch group, it will fully connect once you have moved it to the group you created.

[tomer_iyar]

it is not added to the SZ,
the state stuck on SZ Query and it appears to fail to get a response,
so its not added 😕
thanks.

[simon_pollard]

Your switch should be running the latest version 8.0.90 software and it should have been upgraded using the UFI image (see the 8.0.90 release notes for details).