cancel
Showing results for 
Search instead for 
Did you mean: 

factory reset - CLI- No access to power

abilashpr
Contributor III
Hi

We don't have access on power of switch, would like to know if there is Command to factory reset the ICX 7150 ?

Thank you,

Regards,
Abilash PR
5 REPLIES 5

ravi_vatsavai
New Contributor II
Hi,

If you have CLI access, then you can use 'erase starup-config' followed by a 'reload' command which will wipe out the configuration on the switch. 
Thanks,
Ravi

abilashpr
Contributor III
Thanks Ravi.

ryan_guerrero_6
RUCKUS Team Member
Here is another way to do the same thing plus reset the password:

Reset Password

1.       Press and hold Ctrl+y then release and push M then release and push Enter

2.       Type “reset” at OS prompt

3.       Press B (for monitor) keep pressing until you’re in monitor mode

4.       Type – “no password” or to completely wipe type “use default-configuration

5.       To reboot type “boot or boot system flash primary

abilashpr
Contributor III
Thank you Ryan.