The default for Flooding of Unregistered IPv4 Multicast Frames changed from enabled to disabled between 8.0.95 and 9.0.*, and the documentation page title does not accurately reflect that change.8.0.95 Disabling the Flooding of Unregistered IPv4 Mult...
Hi All,I am new to the Ruckus ICX Switches. How do I check the configured interface? Like Cisco products, allow the user to see the interface configuration e,g "show run config int gi 1/1/1 ".Do we have the same feature for ruckus? I would like to us...
Have two ICX7150 stacked and use the latest Router firmware.Stacked with two SPF+ 10G cable. With default settings since I still not figure out how to access the Web interface to manage.Then I have a UXG-Pro as Gateway and DHCP Server, connected by ...
Same problem as everyone else when the power goes out. Switch is making everything very slow to the point where nothing or barely works. I am not saavy enough to plug into the switch and start entering code.
Trying to determine if breaking out the 100g rear ports on the 7650 is possible. I've tried using a 100G QSFP28 to 4X 25G SFP28 Breakout DAC and show media detects it as 40GBASE-Passive Copper 1m (QSFP+) (Not Supported). I've searched and can't find...
