RUCKUS ICX Switch Family

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

My primary and secondary flash was erased during an attempt to update the image. My CLI is showing: ICX64XX-boot>>.

My primary and secondary flash was erased during an attempt to update the image. My CLI is showing: ICX64XX-boot>>. I can ping to and from my PC which I am using as ymy TFTP server. I loaded the latest firmware files on to my PC. I have them sit...

Automatically backup config to scp or tftp when "write mem"

In Cisco, I can do that using thesearchivepath scp://root:eve@10.0.10.70/$hwrite-memoryHow to achieve the same in FCX648S ver 8.0.30tq

Is it possible to use SFP on 10G slot of Smartzone 100?

Please, could you inform if SFP E1MG-TX works in 10G slot of Smartzone 100? In total, we need 06 Giga ports but Smartzone 100 only has 04x 1G plus 02x 10G ports. If possible, I ́d like to use the SFP E1MG-TX on 10G slots ports of Smartzone 100 to ach...

ICX series Switches are suporting PAT(Port address translate) or NAT(Network Address Translate) ?

I can't find this contents in datasheet & Ruckus FastIron Administration Guide, Does ICX7450 switch require a lincense to use NAT funtion ?

updating FWS firmware using TFTP

I have a Brocade FWS648G switch which I received as RMA. I have assigned an IP to switch and same range ip address to the PC.I am able to ping or ssh to the switch. But from switch I am unable to ping to PC.It gives Error : TFTP timeout, Error 5Can y...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1