I need some help, i am using an 7450-24p with an router image running on version 08.0.80e.
i enable dhcp server on the switch. i am trying to have 2 vlans with different ip subnet.
below is my config, did i miss or do anything wrong over here? as i am not able to get any ip from it.
Current configuration: ! ver 08.0.80eT213 ! stack unit 1 module 1 icx7450-24p-poe-port-management-module module 2 icx7400-xgf-4port-40g-module module 3 icx7400-qsfp-1port-40g-module module 4 icx7400-qsfp-1port-40g-module ! global-stp ! vlan 1 name DEFAULT-VLAN by port spanning-tree ! vlan 10 name IP-subnet_192.168.1.0/24 by port untagged ethe 1/1/1 to 1/1/12 router-interface ve 10 spanning-tree ! vlan 20 name IP-subnet_192.168.2.0/24 by port untagged ethe 1/1/13 to 1/1/24 router-interface ve 20 spanning-tree ! ip dhcp-server pool wifi excluded-address 192.168.1.1 192.168.1.10 lease 1 0 0 network 192.168.1.0 255.255.255.0 option 3 ip 192.168.1.1 option 6 ip 188.8.131.52 deploy ! ip dhcp-server pool smart excluded-address 192.168.2.1 192.168.2.10 lease 1 0 0 network 192.168.2.0 255.255.255.0 option 3 ip 192.168.2.1 option 6 ip 184.108.40.206 deploy ! interface ve 10 port-name wifi ip address 192.168.1.1 255.255.255.0 ! interface ve 20 ip address 192.168.2.1 255.255.255.0
Interesting. I don't see anything wrong in your configuration although it is just a snippet. Are you learning mac-addresses probably on the ports? "show ip dhcp-server summary" and "show ip dhcp-server binding" should give you a clue about whether the switch is trying to serve addresses.
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer support.ruckuswireless.com/contact-us