RUCKUS ICX Switch Family

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

access-list 'established' not working properly in 09.0.10

Configuration snippets: vlan 80 name untrusted by port untagged ethe 3/1/3 ip access-group untrusted in interface ve 80 ip address 192.168.80.2/24ip access-list extended untrusted enable accounting sequence 10 permit tcp any 192.168.0.0/1...

Problem with writing to flash on ICX

Hi, I'm trying to write changes to new configuration on ICX7150-C12p but I receiving this message: flash_fcreat: Failed to create file startup-config.txtError - failed to create startup-config. After reboot, all the changes are gone. Is this a...

Resolved! New firmware, old bootrom

Hello, I did an upgrade ICX7150 to SPS08095e to a few switches but the old bootrom remained on some of them. telnet@ICX7150#show flashStack unit 1: NAND Type: Micron NAND 2GiB (x 1) Compressed Pri Code size = 31457280, Version:08.0.95eT211 (S...

Default VLAN, Switch Management via SSH, and NEXUS compatability

Hi all, We recently installed a pair of Cisco NEXUS 3500 switches at the core of our LAN network. Prior to installing the Cisco devices, we had used VLAN 1 for a bunch of stuff... all ICX switches had an IP address assigned to them on VE1 (on VLAN1)...

Resolved! Correct way to enter negative time-offset in DHCP server?

The 'option time-offset' command for the IPv4 DHCP server indicates that it accepts a 'signed integer representing the number of seconds offset from UTC'. I'm in America/New_York, so this value is "-18600".However, 'option time-offset -18600' generat...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1