I have configured a logging buffer 1000 on the ICX 7450. and unfortunately before I was able to configure the logging server on the switch, the system uptime got to 0,
Is there a way for us to determine the cause of this service restart?
base from the logs on the switch i can see that the temperature is normal
Fan controlled temperature: 33.0 deg-C
Fan speed switching temperature thresholds: Speed 1: NM<----->60 deg-C Speed 2: 50<-----> 80 deg-C (shutdown)
Fan 1 Air Flow Direction: Front to Back Fan 2 Air Flow Direction: Front to Back Slot 1 Current Temperature: 25.0 deg-C (Sensor 1), 33.0 deg-C (Sensor 2), 30.5 deg-C (Sensor 3), 22.5 deg-C (Sensor 4) Slot 2 Current Temperature: 23.0 deg-C (Sensor 1) Slot 3 Current Temperature: 24.5 deg-C (Sensor 1) Slot 4 Current Temperature: 26.0 deg-C (Sensor 1) Warning level.......: 70.0 deg-C Shutdown level......: 80.0 deg-C
If the system information at the bottom of the show version output says "Cold Start" then the switch has been through a power outage. Either a local power outage or someone switched it off and on again at the power outlet.There is no way for the switch to know the reason why it's power supply was cut.