cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN 1 is not working on stack mode

julien_ange
New Contributor

Dear All,

First off please excuses me English isn't my native language.

We have two of Brocade ICX7250-48P stacked, the idea behind is to accomplish a failover , whenever switch one is down we will remain online because each server will have two ports connected to each switch.

the issue is Switch number is working fine so ive configured the second switch as stack see below

the issue as next, when I connect the cable to switch 1 doesn't matter which ports I received IP from VLAN1, when I connect it to the second switch I don't get any ip.

I don't know what I have done wrong can someone please point me to the right direction ?

this the output of VLAN1

PORT-VLAN 1, Name DEFAULT-VLAN, Priority level0, Spanning tree Off
Untagged Ports: (U1/M1) 47
Untagged Ports: (U1/M2) 2 4 5 6 7 8
Untagged Ports: (U2/M1) 47
Untagged Ports: (U2/M2) 2 4 5 6 7 8
  Tagged Ports: None
  Uplink Ports: None
DualMode Ports: None
Mac-Vlan Ports: None
    Monitoring: Disabled

this is output of the brief interface

2/1/1     Down   None   None None None No 141 0 609c.9f4b.808c
2/1/2     Down   None   None None None Yes N/A 0 cc4e.24e3.49ab
2/1/3     Up     Forward Full 1G   None Yes N/A 0 cc4e.24e3.49ac
2/1/4     Down   None   None None None Yes N/A 0 cc4e.24e3.49ad
2/1/5     Down   None   None None None Yes N/A 0 cc4e.24e3.49ae
2/1/6     Down   None   None None None Yes N/A 0 cc4e.24e3.49af
2/1/7     Down   None   None None None Yes N/A 0 cc4e.24e3.49b0
2/1/8     Disable None   None None None Yes N/A 0 609c.9f4b.808c
2/1/9     Down   None   None None None Yes N/A 0 cc4e.24e3.49b2
2/1/10   Down   None   None None None Yes N/A 0 cc4e.24e3.49b3
2/1/11   Up     Forward Full 1G   11   Yes 141 0 609c.9f4b.808c
2/1/12   Up     Forward Full 1G   11   Yes 141 0 609c.9f4b.808c
2/1/13   Down   None   None None None Yes N/A 0 cc4e.24e3.49b6
2/1/14   Down   None   None None None Yes N/A 0 cc4e.24e3.49b7
2/1/15   Down   None   None None None Yes N/A 0 cc4e.24e3.49b8
2/1/16   Down   None   None None None Yes N/A 0 cc4e.24e3.49b9
2/1/17   Down   None   None None None Yes N/A 0 cc4e.24e3.49ba
2/1/18   Down   None   None None None Yes N/A 0 cc4e.24e3.49bb
2/1/19   Down   None   None None None Yes N/A 0 cc4e.24e3.49bc
2/1/20   Down   None   None None None Yes N/A 0 cc4e.24e3.49bd
2/1/21   Down   None   None None None Yes N/A 0 cc4e.24e3.49be

22 REPLIES 22

@andre_paiva I am not sure I understand your question correctly.

do you mean why I have PVID configured on the ports?

Hi Julien

It's a little confusing for me.
1. These are the ports "1/1/11, 1/1/12, 2/1/11, 2/1/12"?. If it is another ports, diplay "show inter eth brief"?

2. Any other vlan only works on SW1 and does not work on SW2?

@andre_paiva apologies if I got you confused those ports are LACP for the NAS I just checked they are configured to works on VLAN1. and working fine.

on the SW2 none of the interfaces are working, whenever I connect my laptop to one of the interfaces it doesn't receive the IP from the DHCP.

jijo_panangat
RUCKUS Team Member

Do you receive Ip-address for any other devices in the same vlan ? 

Pls check if the dhcp server is reachable from the PC vlan and other related configs.

Thanks

Jijo 

This is a great suggestion for @julien_ange. I'm sorry, but I see that I can't help in your stacking environment.