First off please excuses me English isn't my native language.
We have two of Brocade ICX7250-48P stacked, the idea behind is to accomplish a failover , whenever switch one is down we will remain online because each server will have two ports connected to each switch.
the issue is Switch number is working fine so ive configured the second switch as stack see below
the issue as next, when I connect the cable to switch 1 doesn't matter which ports I received IP from VLAN1, when I connect it to the second switch I don't get any ip.
I don't know what I have done wrong can someone please point me to the right direction ?
the NAS LACP is just a test to check the LACP configuration which seems to work.
1. You are connecting a single server that has 4 ports, two of which are connected in the each stack switch
yes this what I am exactly doing. two ports at each switch. so whenever something happens with whatever switch we will remain connected.
but when I connect a Radom pc to the second switch, none of the ports are working, the device is supposed to receive ip from the DHCP server.
is this maybe because the second switch is configured as stand by?
T=52d3h44m21.7: alone: standalone, 😧 dynamic cfg, S: static
ID Type Role Mac Address Pri State Comment
1 S ICX7250-48 active 609c.9f4b.808c 0 local Ready
2 S ICX7250-48 standby cc4e.24e3.49aa 0 remote Ready
-2/3| 1 |2/1--2/1| 2 |2/3-
| +---+ +---+ |
Standby u2 - protocols ready, can failover or manually switch over
Current stack management MAC is 609c.9f4b.808c