cancel
Showing results for 
Search instead for 
Did you mean: 

Updating secondary 08.0.90D from primary 09.0.10B

dane_holland
New Contributor III

From my web interface on my primary flash partition, running 09.0.10B, can I update the secondary flash (currently at 08.0.90d) to a more recent 08.0.9xx version? I do not want to move my secondary flash to 09.x.x at this time. This is an ICX 7150 C12P switch.

This is what I have going on right now, for full clarity:

Capture.PNG

1 ACCEPTED SOLUTION

dane_holland
New Contributor III

I ended up just flashing both the primary and secondary with 08.0.95 images, as I'm not fond of the 09.0.10 release.

Steps:

1. Disconnected all Ethernet
2. Downloaded new firmware from commscope
3. From the download file, after unblocking, pulled the .bin firmware file out for the 7150
4. Formatted 4GB USB drive with FAT32
5. Copied the aforementioned .bin to the USB drive
6. Connected to the ICX with USB comm cable, used Putty
7. Connected USB
8. Confirmed contents of USB with the command 'show files disk0'
9. Erased primary flash with the command 'erase flash primary'
10. Copied the new flash over with the command 'copy disk0 flash SPS08095xcufi.bin primary'
11. After copy was done, removed the USB drive with the command 'unmount disk0', then pulled drive
12. Ran the command 'reload', and pressed Y twice to prompts

View solution in original post

2 REPLIES 2