The switch is rebooted Brocade ICX 7250-24P

[user_f5723a]

Good day! I'm new to this, but I got this toy from a former employee))) I tuned it up, but the next day it just simply rebooted to the factory settings and that's it! I can only enter it through boot, and if I reboot, then on the command line it simply does not respond! If someone came across this, then help!

[hashim_bharooc1]

Hi user_f5723a,
Hope you are doing great!!!
Can you please paste the prompt you see on the console.
If you factory defaulted then it should have no configuration.
I am not sure if you boot into monitor mode or in console.

If you factory defaulted and you see CLI prompt then you need to re configure it.


But if you are in boot monitor then you need to load software code and boot monitor.

Here is link to emergency download if need be:

https://support.ruckuswireless.com/articles/000008853

Hope this helps.

Thanks

Hashim

[user_f5723a]

Good day hashim bharoocha! I sent you a photo of what I described, look, if you can, help me, why am I doing wrong! ( When you press enter, it does not display itself! (I don’t know what to do anymore! thanks in advance!

[jijo_panangat]

Hello user_f5723a,

It seems the switch is booting up and coredumping, Is it still stuck at bootprompt as shown in the first image ? 

Here is a short video on recovering from boot prompt if that is the case.

https://youtu.be/RHriOYYD_iI

Also, Pls open a tac case and upload the core files for analysis.

Thanks

Jijo 

[user_f5723a]

good evening jijo panangat, cant get it back to work! ((((if anyone has any other options I would try them! Thanks in advance!