I upgraded the firmware of ICX-7250 to 08.0.90mc according to the official document and copied the primary flash to the secondary. But when I show flash, I found that the version of the boot code of the primary and the boot code of the secondary are inconsistent. If I want to solve this problem, do I have to copy the 08.0.90ufi image again? And do I need to reboot after copying? Thanks!!
I am not 100% sure on the exact steps you took and what code you came from, but looks like you have old boot code in primary. You should be able to copy UFI image (includes boot code) to primary again and reload to resolve your issue.
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer support.ruckuswireless.com/contact-us