The boot code of the primary and the boot code of the secondary are inconsistent

[jaylin]

I upgraded the firmware of ICX-7250 to 08.0.90mc according to the official document and copied the primary flash to the secondary. But when I show flash, I found that the version of the boot code of the primary and the boot code of the secondary are inconsistent. If I want to solve this problem, do I have to copy the 08.0.90ufi image again? And do I need to reboot after copying?
Thanks!!

Stack unit 1:
  Compressed Pri Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
  Compressed Sec Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
  Compressed Pri Boot Code size = 786944, Version:10.1.14T215
  Compressed Sec Boot Code size = 786944, Version:10.1.18T215
  Code Flash Free Space = 1714507776
Stack unit 2:
  Compressed Pri Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
  Compressed Sec Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
  Compressed Pri Boot Code size = 786944, Version:10.1.14T215 (spz10114)
  Compressed Sec Boot Code size = 786944, Version:10.1.18T215 (spz10118)
  Code Flash Free Space = 1714503680

[BenBeck]

Hey @jaylin,

I am not 100% sure on the exact steps you took and what code you came from, but looks like you have old boot code in primary. You should be able to copy UFI image (includes boot code) to primary again and reload to resolve your issue. 

[jaylin]

Hi BenBeck

Thanks for the suggestion, I'll try again.

[jaylin]

Hi BenBeck

May I ask if the problem I encountered will affect the operation of the device and is it abnormal after the device is restarted before I re-copy the image?Thanks.

[BenBeck · Accepted solution]

Once you are running the FastIron OS (SPS08090mc.bin), the boot code is no longer in play. You should be 100% functional right now, but we would still recommend recopying the UFI just to be safe.