CommScope RUCKUS Community Forums

jaylin · ‎01-18-2023

I upgraded the firmware of ICX-7250 to 08.0.90mc according to the official document and copied the primary flash to the secondary. But when I show flash, I found that the version of the boot code of the primary and the boot code of the secondary are inconsistent. If I want to solve this problem, do I have to copy the 08.0.90ufi image again? And do I need to reboot after copying?
Thanks!!

Stack unit 1:
Compressed Pri Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
Compressed Sec Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.14T215
Compressed Sec Boot Code size = 786944, Version:10.1.18T215
Code Flash Free Space = 1714507776
Stack unit 2:
Compressed Pri Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
Compressed Sec Code size = 29360128, Version:08.0.90mT211 (SPS08090mc.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.14T215 (spz10114)
Compressed Sec Boot Code size = 786944, Version:10.1.18T215 (spz10118)
Code Flash Free Space = 1714503680

BenBeck · ‎01-19-2023

Once you are running the FastIron OS (SPS08090mc.bin), the boot code is no longer in play. You should be 100% functional right now, but we would still recommend recopying the UFI just to be safe.

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

jaylin · ‎01-30-2023

Hi BenBeck

This issue has been resolved,thank you.

CommScope RUCKUS Community Forums

The boot code of the primary and the boot code of the secondary are inconsistent