Solved: Re: Stacking two ICX 7550 - Page 2

Anonymous · ‎09-01-2021

Hi,

I'm planning to stack two CS ICX 7550 for redundancy links to Access switches , my question is, it will be necessary to have duplicate DAC cable for redundancy or just one cable is enough ?

DarrelRhodes · ‎09-01-2021

Hello,

I would recommend consulting the latest ICX stacking guide here: https://support.ruckuswireless.com/documents/3453-fastiron-08-0-95-ga-stacking-configuration-guide

It is possible to stack over a single DAC but as the cost of these cables is minimal, I personally would recommend using 2x cables for additional resilience.

I hope that helps,
Darrel.

View solution in original post

DarrelRhodes · ‎09-01-2021

Hi,

I believe the stack-links can be aggregated to increase bandwidth. Please find a link to our stacking feature-sheet: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjoxNy9xt3yA...

The following statement is on the first page:

Stacking on standard Ethernet ports

Unlike traditional stackable switches, ICX switches do not rely on proprietary stacking ports and stacking cables. Stacking is supported over standard 10Gbps SFP+ or 40Gbps QSFP+ Ethernet ports. The same ports can be configured for stacking or to forward uplink traffic. This provides a level of flexibility unavailable on other stackable switches. Additionally, multiple stacking ports can be aggregated together to increase the stacking bandwidth and boost performance when needed.

I hope that helps,
Darrel.

View solution in original post

happytohelp · ‎03-15-2023

Hi Dante,

Even though one cable is sufficient to bring the stack up, we recommend 2x cables for redundancy and bandwidth.

Hope that helps.

Dante · ‎03-15-2023

Thank you so much for your quicly reply,

I provided to buy 2 of 25GBase direct application cable - SFP28 (M) to SFP28 (M) passive.

I hope that they are OK.

Best Regards

Dante