Stacking two ICX 7550

[Anonymous]

Hi,

I'm planning to stack two CS ICX 7550 for redundancy links to Access switches , my question is, it will be necessary to have duplicate DAC cable for redundancy or just one cable  is enough ?

[DarrelRhodes · Accepted solution]

Hello,

I would recommend consulting the latest ICX stacking guide here: https://support.ruckuswireless.com/documents/3453-fastiron-08-0-95-ga-stacking-configuration-guide

It is possible to stack over a single DAC but as the cost of these cables is minimal, I personally would recommend using 2x cables for additional resilience.

I hope that helps,
Darrel.

[DarrelRhodes · Accepted solution]

Hello,

I would recommend consulting the latest ICX stacking guide here: https://support.ruckuswireless.com/documents/3453-fastiron-08-0-95-ga-stacking-configuration-guide

It is possible to stack over a single DAC but as the cost of these cables is minimal, I personally would recommend using 2x cables for additional resilience.

I hope that helps,
Darrel.

[Anonymous]

Thank you for your reply, when you use two DAC cables instead of one, the throughtput is double , I mean they both links are active or just one is active and the second is on standby?

[DarrelRhodes · Accepted solution]

Hi,

I believe the stack-links can be aggregated to increase bandwidth.  Please find a link to our stacking feature-sheet: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjoxNy9xt3yA...

The following statement is on the first page:

Stacking on standard Ethernet ports

Unlike traditional stackable switches, ICX switches do not rely on proprietary stacking ports and stacking cables. Stacking is supported over standard 10Gbps SFP+ or 40Gbps QSFP+ Ethernet ports. The same ports can be configured for stacking or to forward uplink traffic. This provides a level of flexibility unavailable on other stackable switches. Additionally, multiple stacking ports can be aggregated together to increase the stacking bandwidth and boost performance when needed.

I hope that helps,
Darrel.

[Dante]

Good Afternoon,
I would like to have your support in order to choose a Stack Cable, I have to connect in Stack 2 Switch Ruckus ICX 7550 48ZP.

Do you suggest to use only 1 cable or 2 cables?

Thank you in advance for your support