QOS Priority on VLAN

[dspjones]

In the Ruckus FastIron Security Configuration Guide under the Configuring QoS priority for a VLAN

it says:

"Configuring QoS priority for a VLAN

NOTE

Configuring QoS priority for a VLAN is not applicable on the Ruckus ICX 7150."

So my question is - then how do I prioritize vlan 1000 (in this case) traffic above other vlans?

For example on an Aruba 2930m switch I have the following:

LOUNGE-sw# sh run vlan 1000

Running configuration:

vlan 1000
name "Network Management"
untagged 4-9,11-18,20,48
ip address 10.105.0.18 255.255.254.0
qos priority 7
exit

Love Aruba for simplifying stuff like that.

How do I achieve the same thing on a Ruckus ICX7150-48PF switch.  The switch is running router code if that matters and is currently on version 09.0.10eT213.

[jdryan]

Thank you for confirming that for us. 

Glad that we were able to help with the query. 

[Paulnoonan]

Sorry I didn't see the reply to this, can someone please post an example