09-06-2024 09:04 AM
We had a 7250 POE failure on a stacked switch(2nd in 3 switch stack) and replaced it with a spare 7250. I matched the firmware. When I plugged in the copper SFP+ 10Gb gbics, I get a console message stating that they have been detected, but there's no link light on them and the switch doesn't add itself back to the stack. If I do a show license on the stack I get the following:
7250(3)#sh lic
Unit License Name L3 Premium Port Speed Upgrade Speed Ports MACsec
1 l3-base-8X10G No Yes 10G 8 NA
3 l3-base-8X10G No Yes 10G 8 NA
if I do a show lic on the spare, I also get "l3-base-8X10G No Yes 10G 8 NA"
Now, this is odd. When I do a show license unit 1, I get:
7250(3)#sh lic unit 1
Unit License Name L3 Premium Port Speed Upgrade Speed Ports MACsec
1 l3-base-8X10G No Yes 10G 8 NA
Index Lic Mode Lic Name Lid/Serial No Lic Type Status Lic Period Lic Capacity
Stack unit 1:
1 Node Lock ICX7250-10G-LIC-POD xxxxxxxxxxx Normal Active Unlimited 2
If I do a show license unit 3, I get:
7250(3)#sh lic unit 3
Unit License Name L3 Premium Port Speed Upgrade Speed Ports MACsec
3 l3-base-8X10G No Yes 10G 8 NA
My questions are
Thank you in advance for any help!
09-09-2024 09:25 AM
Hi Ericbord
Thank you for reaching us
Could you help me with below logs from the switch
Thanks