cancel
Showing results for 
Search instead for 
Did you mean: 

POE-HA / Stacking Available on ICX 7150-CP12

Knowguy
New Contributor

All,

Trying to figure out if POE-HA is available on this switch as I want to use it as a replacement for my Cisco 2960CX which does have this feature in firmware. 

 

Also would love to know if I can stack two of these switches without an additional license. From what I can tell I would need to purchase a license to increase the speed on the stack ports to 10GB.

Thanks in advance!

1 ACCEPTED SOLUTION

BenBeck
Moderator
Moderator

Hey @Knowguy 

You are correct in that 10Gb is required. This can be confirmed here:

https://docs.commscope.com/bundle/fastiron-08095-switchstackingguide/page/GUID-ED19F884-7A42-439C-9B...

As for POE-HA, our perpetual POE and Fast Boot POE features are not available on the ICX7150. You would need to look at either the ICX7550 or ICX8200 for those features. 

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

1 REPLY 1

BenBeck
Moderator
Moderator

Hey @Knowguy 

You are correct in that 10Gb is required. This can be confirmed here:

https://docs.commscope.com/bundle/fastiron-08095-switchstackingguide/page/GUID-ED19F884-7A42-439C-9B...

As for POE-HA, our perpetual POE and Fast Boot POE features are not available on the ICX7150. You would need to look at either the ICX7550 or ICX8200 for those features. 

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us