OSPF Issue ICX7450

[asdasdas]

Hello, we have 2 ICX7450 in stack. We have enabled OSPF process. I see LSA in ospf database, but there are no routes in Routing table. What can be issue? 

Version of software is SPR09010d. OSPF Neighbor is Cisco Router.

[Chandini]

Hi Asdasdas

Ack and Noted. Could you please open a case using the below link.

• https://support.ruckuswireless.com/contact-us

Thanks 

[asdasdas]

Hello @Chandini Thanks for your reply, unfortunately we have not active support license...

But I found something stranger, please see attaches files.
v445 - It's Router-1 with 10.10.255.1 IP address assigned

v446 - It's Router-2 with 10.10.254.1 IP address assigned

But in "show ip ospf neighbor" we see that there is the same ip address. Is it bug from ICX side? 

[asdasdas]

Hello, any ideas? 

[Chandini]

Hi Asdasdas

Ack and Noted. Right the neighbor information on ve 445 should reflect  10.10.255.1. Could you also try the below command and check if the below commands display the correct details for the respective ve.

• show ip ospf neighbor extensive
• show ip ospf neighbor router-id <Neighbor ID>
  

Thanks 

[asdasdas]

Hi @Chandini , there is output of commands:

I tried to redeploy ospf config, but result is the same