Showing results for 
Search instead for 
Did you mean: 

My Ruckus switch is not booting up after power outage.

New Contributor

Hello- My Ruckus switch is not booting up after power outage. I see the power in green light but the internet line is amber in color. Tried to reboot multiple times by switching power on and off but of no use.


RUCKUS Team Member

Hi Manjukusam,


Seems like the switch is stuck in boot mode. Kindly try below:

1-Please try to disconnect from the Power outlet the ICX-7150 and reconnect it.

2-Please try to press the reset button using a paper click or a small stick 

  1. Remove power from the switch.
  2. Press and hold the Reset button while applying power to the switch.
  3. After all the system LEDs flash amber, release the Reset button.

Video link:

If this step doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

How to perform a Software recovery on an ICX7150 switch

Ruckus ICX Recovery Load boot code from boot monitor

Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

2. Upgrade a Switch ICX7150-C12P via TFTP

3. Upgrade a switch via Web GUI (ICX7150 Switch)

If the above does not help, You can use below link to log a ticket: