Hi Caliparcerito ,
Thank you for posting you query !!!
I understand that in ICX 8200 every time a WiFi device moves from AP to AP creates a loop error.
I have a question for you here :
Are you experiencing CPU spike ,Port utilization spike ,and among others which includes Duplicate ip address
you can verified the above with the below commands :
show cpu (3 times every one minute)
show cpu task (3 times every one minute)
show interface | i line | util
show logging
de (3 times 1 minute apart)
If in the above is logs we see increase in cpu spike or duplicate ip adress then there could actually be a loop.
Common logic followed in mac-movement, is when there is movement between the 2 set of ports : the warning is triggered and this could be a false positive .
And also i would suggest you to check the connections and ensure that there is no loop in the network
Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you further.
Please confirm us if you are from Lennar homes.
https://support.ruckuswireless.com/contact-us
I hope this information helps you
Please feel free to leave us a message if any concerns
