ICX7450 OS

[zachary_hull]

I am running ICX7450's and some of our switches were pre-maturely upgraded to 08.0.92.

I would like to know if it is possible to migrate the OS from 08.0.92 [backward] to 08.0.90.

Has anyone tried this before?  Is there a procedure for this?

Please, advise.

[zachary_hull]

Appears FIPS is unhappy...

SSH@ICX7450-24P Router#copy flash flash pri
Flash Memory Write (8192 bytes per dot)
SSH@ICX7450-24P Router#.......

...

.........................
Processing the bundle image...
Flashing application image to Primary partition...
Aborting, bundle image FIPS validation failed

[BenBeck]

Do you have FIPS turned on? 

[zachary_hull]

@ben_beck

I inherited these switches from another administrator and apparently he enabled FIPS.

I didn't turn it on. 

Via console > no fips enable

yes?

[zachary_hull]

@ben_beck

ICX7450-24P Router(config)#no fips enable
FIPS Error: System is not running in FIPS mode.

It says FIPS isn't running, but apparently it is somewhere.
 

[BenBeck]

Hey Zachary, 

FIPS can be quite involved sometimes. This document can shed some light:

https://support.ruckuswireless.com/documents/3026-fastiron-08-0-90-ga-fips-common-criteria-guide

It may be worth opening a case (see my signature) and having a support engineer assist you.