cancel
Showing results for 
Search instead for 
Did you mean: 

ICX7150 - no available SSH session

andrea_tassi
New Contributor


Good evening to all, I would have a problem on a Ruckus ICX7150-48P-4X10GR switch installed in the company where I work, in some cases it involves connecting to ssh.
Initially we had no problem connecting to ssh, for about two weeks it has happened that trying to connect in ssh we have this error (I add stamp).
Receiving this error is as if there were no more sessions available for the ssh connection, connecting to the console giving the "sh who" command we actually see that the ssh sessions are almost all closed and therefore available.
The solution to this problem is to wait a few minutes (usually 10-15) to be able to connect again.

Has anyone like this happened to anyone?
The version mounted on the switch is
SW: Version 08.0.80dT211

Thank you in advance
6 REPLIES 6

william_hadley_
New Contributor III
Hi,

Please try 8080e. It has 3 defects fixed for SSH.

Thanks
Bill

ryan_guerrero_6
RUCKUS Team Member
Hi ,

if you copy and paste these commands you can connect via telnet

en


con t



telnet serv


wr mem


end

ryan_guerrero_6
RUCKUS Team Member

vu_pham_ghtztqm
New Contributor III
Hi - Is this ICX7150 being managed by Smartzone? Or has SZ function been enable/disable on this ICX several times since bootup? If this is true, please upgrade to 8090a. I'm suspecting that it's running into a known issue which already fixed in 8090a. Also, 8090 is our long term patch, we're recommending 8090x over 8080x

Thanks,

Vu