ICX MAC auth for Dynamic VLAN without RADIUS

[matt_236689]

I saw this article and it appears the commands are in version 10, but they're not found.   mac-auth auth-filter is an interface command in the documentation, but there's no documented way to create MAC filters, only ACLs.  When you try to enter either, they aren't found.

Is it still possible to somehow create a MAC filter within ICX and dynamically assign to a given VLAN?

RUCKUS Forums - ICX MAC based dynamic vlan assignment without radi... - CommScope RUCKUS Community F...

[Chandini]

Hi Matt_236689

Ack and Thanks for reverting. Since you are using cameras I have mentioned a link below which is about device profile. Could you run through the below link and see if the details in the link meets your requirement. 

Port Profile Overview

• https://docs.commscope.com/bundle/fastiron-10010-managementguide/page/GUID-42BFFDF9-E71F-4C81-99F6-2...

Configuring Dynamic Port Profile

• https://docs.commscope.com/bundle/fastiron-10010-managementguide/page/GUID-866F083F-8206-4F16-A309-B...

Thanks