ICX 7250 FIPS Firmware Sig Setup Issues

[IanJSaul]

Aloha,

This is our first time testing Ruckus products, and we've encountered an issue while configuring FIPS mode.  I believe that the SIG files were not copied to the switch during the 09.0.10j_cd8 update.  I'm now experiencing a boot loop, and haven't yet managed to resolve it.  Attempted TFTP image transfer from the bootloader, and mounting the files from a USB with the manifest file, no luck.

If there is a technical guide for recovery in this scenario that I've overlooked, please direct me to it.  From my understanding, this switch was not purchased new/through an authorized channel, so I do not believe it has any warranty or technical support coverage.

Thanks!

Ruckus Networks Bootloader: 10.1.27T215 (Feb 06 2025 - 20:29:34)

[IanJSaul · Accepted solution]

I solved this issue and documented the steps here:
Send Help - Methinks I Bricked It (ICX7250 FIPS No SIG) : r/Brocade