ICX 7250/7150. Broadcast limit doesn't work.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-06-2019 06:31 AM
Hi team!
I test broadcast/multicast/unknown-unicast limits on ICX7250 and ICX7150 (hw ver. 8.0.9).
I've configured ports as:
interface ethernet 1/1/1
spanning-tree 802-1w admin-edge-port
broadcast limit 96 kbps
multicast limit 400 kbps
unknown-unicast limit 96 kbps
stp-bpdu-guard
But, nothing happens! I genarate broadcast traffic, but port works normally in this moment.
Can anyone come across this problem?
I test broadcast/multicast/unknown-unicast limits on ICX7250 and ICX7150 (hw ver. 8.0.9).
I've configured ports as:
interface ethernet 1/1/1
spanning-tree 802-1w admin-edge-port
broadcast limit 96 kbps
multicast limit 400 kbps
unknown-unicast limit 96 kbps
stp-bpdu-guard
But, nothing happens! I genarate broadcast traffic, but port works normally in this moment.
Can anyone come across this problem?
6 REPLIES 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2019 12:04 AM
Hello Nik kul,
Is this a standalone, stack or SPX environment ? BUM rate limiting is not supported on PE ports in an SPX environment but do support on CB ports.
Do u see the configured values under show rate-limit broadcast/multicast/unknown-unicast output ?
Is this a standalone, stack or SPX environment ? BUM rate limiting is not supported on PE ports in an SPX environment but do support on CB ports.
Do u see the configured values under show rate-limit broadcast/multicast/unknown-unicast output ?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2019 01:38 AM
Hi Jijo,
I tested on stack of two ICX7250 and standalone ICX7150.
What's mean PE and CB ports?
Output from console:
7250#show rate-limit broadcast
Broadcast Limit Settings:
Port Limit Packets/Kbps
1/1/1 96 Kbps
1/1/2 96 Kbps
1/1/3 96 Kbps
2/1/1 96 Kbps
2/1/2 96 Kbps
I tested on stack of two ICX7250 and standalone ICX7150.
What's mean PE and CB ports?
Output from console:
7250#show rate-limit broadcast
Broadcast Limit Settings:
Port Limit Packets/Kbps
1/1/1 96 Kbps
1/1/2 96 Kbps
1/1/3 96 Kbps
2/1/1 96 Kbps
2/1/2 96 Kbps
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2019 02:29 AM
Hi Nik Kul,
Thanks , PE and CB are terminologies in campus fabric, reference link below.
http://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-switchstackingguide/GUID-B2FA4C26-4F2...
It seems the config is applied correctly, would you be able to open a tac case for debugging your environment ? There are some shell commands to check if the HW registers are correctly set and need remote access.
Thanks , PE and CB are terminologies in campus fabric, reference link below.
http://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-switchstackingguide/GUID-B2FA4C26-4F2...
It seems the config is applied correctly, would you be able to open a tac case for debugging your environment ? There are some shell commands to check if the HW registers are correctly set and need remote access.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-07-2019 04:18 AM
Unfortunately, I can't open tac case.
This equipment was got from provider for testing by short period. It doesn't have support licenses.
This equipment was got from provider for testing by short period. It doesn't have support licenses.