Hi team! I test broadcast/multicast/unknown-unicast limits on ICX7250 and ICX7150 (hw ver. 8.0.9). I've configured ports as: interface ethernet 1/1/1 spanning-tree 802-1w admin-edge-port broadcast limit 96 kbps multicast limit 400 kbps unknown-unicast limit 96 kbps stp-bpdu-guard But, nothing happens! I genarate broadcast traffic, but port works normally in this moment. Can anyone come across this problem?
It seems the config is applied correctly, would you be able to open a tac case for debugging your environment ? There are some shell commands to check if the HW registers are correctly set and need remote access.