ICX 7150 missing address command

[Jerry]

When I try to add an IP address (IP Address xxx.xxx.xxx.xxx. xxx.xxx.xxx.xxx) I get invalid command for Address.

Looking in the menu of the IP command, there is no Address command listed.

How can I add an IP Address if there's not Address command?

Thanks.

[Jerry]

 If I'm upgrading a switch with an old version 08.0.61.Ct211 to the latest version, what would be the best way to go about it?

[BenBeck]

You will need to use 8080f as a step upgrade coming from that old of code. I would recommend something like this:

8061 > 8080f (non-ufi), make sure to wr mem > 8095g UFI

You can certainly open a case and we can help walk you through the first one. 

[Jerry]

Plus I learned a few things about Ruckus switches.

[Jerry · Accepted solution]

With all the information you've given me, I was able to install the 8080f image and set the IP address, subnet, etc...  Now I just need to update to the latest firmware.  Thank you so much for all the help.