cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 default login

graham_salters
New Contributor II

Hi

Does anyone know the default login to ICX 7150 24P?

I thought it was username: Super  and password was spadmin?

1 ACCEPTED SOLUTION

ravi_vatsavai
New Contributor II

@graham_salters - Very close 🙂 . The default password is sp-admin. 

View solution in original post

8 REPLIES 8

Joey_C
New Contributor

I am also trying to log into my ICX 7150 C12.  I changed ISP's and my router.  I managed to get my R510 AP's factory reset and set up my wireless network in the Ruckus Unleashed mobile app.  I had to rejoin all my devices manually to the new WiFi array...yet, when I go into my Unleashed app, everything looks fine except the switch.  It's in red and says not connected.  My PC is connected to one of the LAN ports on the switch.  http://x.x.x.x/home (switch IP) gets me to a web interface off of the TCP port 80 on the ICX.  There is a login prompt, but even after factory reset, "super" "sp-admin" does not work.  I just want to make sure the switch has the correct gateway IP and other needed configuration settings.  Thanks.

graham_salters
New Contributor II

Ravi, you are superstar thanks

craig_burchfiel
New Contributor III

You would have figured it out. Thank you though.

mohammad_atmazi
New Contributor III

The username (super) and the password (sp-admin) that’s correct if you have a new switch need password otherwise you need to reset the password by using console