Re: ICX 6430 - RUCKUS Community Forums

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

Hello, been using the ICX 6430 24P for some time now. I am looking to upgrade and now I'm asking what would be the upgrade model to this managed switch if I stay with brocade? I would order one with dual power supplies if so. Other than that no change in switch requirement's,

Otherwise, Cisco is being pushed. I think moving my backups would be easier to another brocade than cisco. Any opinions would be helpful.

3 REPLIES 3

I would like look at either the 7150 or 8200 series to replace your ICX6430.

https://www.commscope.com/globalassets/digizuite/61729-ds-icx-7150.pdf

https://www.ruckusnetworks.com/globalassets/digizuite/993200-RUCKUS-ICX-8200-Switch-Data-Sheet.pdf

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

Hi Dmoya

Thank you for reaching us.

Adding to the post you can also refer the below link and look through the switches available and compare based on your requirement.

https://www.ruckusnetworks.com/products/ethernet-switches/

I hope this helps

Thanks

Hi Dmoya

Thank you for reaching us.

Adding to the post you can also refer to the below link of ICX-DEPLOYMNET-BUYING-GUIDE for you reference :

https://manufacturerstores.techdata.com/docs/default-source/default-document-library/icx-deployment-....

I hope this information helps you

Please feel free to leave us a message if any concerns

Thanks